Inƙiri Tace ST-100
Inaikika Servo push paper hundred box cartoning,
Anabatar da cikakken kwaya tissue,
Raba tare da kasance daidai,
Hanyar safi na dadi da kosai.
- Bayani
- Kayan da aka ba da shawara
- Kayan cikakken. Kayan hanyar shugaban yana gajiwa 100 kasa/limu. Suna daidai.
- Ina yanzu a cikin wani abubuwa mai tsarin kasance, ya kamata wannan aiki masu gabatarwa/masugabatarwa, ko kaya gabatarwa da kasa tsohu/kasa gabatarwa da kaya tsohu.
- Aiki na farko. An bane 10-20 limu don samun rubutu.
- Amfani na jajincin. An sami amfani daidai don sabban rayuwa da rubutun PLC.
- Kayan bayanai. Ina iya samun makama gabatarwa da rubutun 0.3-0.36mm5, da kowane gabatarwa an bane bayanai.
Hakkinin Rubutu
Yana gajiya daga idanin boxing inaugar da kasareshen rubutu, kasareshen gwabanci, kasareshen cotton, wata.
Binciken ɗaya na'inayen:
Aikin da Paramita na Masina
| Sabon/mode | ST-100 |
| Kwaliti gizo na kawo | 300-400g/m3 |
| Tsayar da faruwa | K(100-240)mm×R(100-120)mm×H(20-90)mm |
| Tsarin tsanar | 30-100 kasa/lima |
| Bayan tsari na rubutu hot melt | 4KW |
| Tsauni Motor | 2.7kw |
| Tsari gaba | 6.7kw |
| Jin shirin rubutu | 3phase 4wire 380V 50Hz |
| Kwakwasar masheen | ≤80dB |
| Kaiwa harshe | 0.5-0.8 Mpa |
| Tsunai harshe | 120-160L/min |
| Girman na'ura | L3619mm×W1406mm×H1800mm |
| Nauyin injin | 2100KG |
Raiwaya da Kayan Tsarin
1, Shema Tacewa
2, Samfari Daularwa
 |
 |
 |
Tsawon Taraiyar Na Duniya
1, Yanayin motor, shafa ta hanyar sadarwa, tsarin jihar PLC da HMI an yi a cikin aiki na wucewa ake kaiya.
2, Wani tsarin daga 90 kasa a lissafi daidai.
3, Tsbirin daidai yanayana, aiki da saukar gaba.
4, An yi shawarwar daya a cikin rubutu ta hanyar sadarwa.
5, Su daidai yanzuwa aikin kuma suna kasance wannan aiki.
6、Kawai da kawo a cikin abubuwan shirin.
7, Suna kasance aikin hanyar gabatar daidai.
8、Za'a iya yi amfani da makama America mai danna.
Tafiyar Labari
 |
 |
 |
| Baki na jami'i kasar carton-Da fatan na detektafiyoyi, a ke yi bayyanin carton a matsayin, bayanin carton kamata alarm | Sabon wata da wata gabar-Automatic yana bukatar gabar da kuma cikin ayyuka materiyar suna | Servo Pusher dai dai side lug opening-A ke yi bayyanin materiyar a cikin carton, materiyar a cikin carton ba a samun rubutu ba ake alarm daidai |
 |
 |
 |
| Mekanizam mai rubutu gishiri-Auta mai rubutu gishiri bincin, yana iya kasance bincin daidai, amfani da sharin mai gabatarwa. | Mashin tsaye Hot melt-Optional domestic mashin tsaye da Nordson mashin tsaye. | Kawai na wannan aiki-Fadama mai wanda aka samun hada aka daiwata daidai an fadi a cikin wannan makon 99.9% pass rate. |
